Whether you want to change the default password of your Netgear WiFi router, update its firmware, or hide its network name (SSID), accessing the default IP is really necessary. However, if you are experiencing issues while doing so, take the help of the troubleshooting hacks mentioned below in order to get rid of them.
Fixed: Netgear Router IP Not Working
- Use the Correct IP Address
One of the major reasons why you are not able to log in to your Netgear wireless router via 192.168.1.1 is because you haven’t typed the correct IP address in the address bar of your internet browser.
Therefore, the next time you try to get logged in, make sure that you are using the correct IP address. While doing so, also keep the following points in mind:
- Do not type the default IP address in the search bar of your browser.
- Avoid typing errors.
- Cross-check the default IP address before hitting Enter.
If you are still not able to log in to your Netgear router via the default IP address, follow the next troubleshooting hack.
- Update Your Web Browser
Another reason why you are not able to access 10.0.0.1 is that the web browser you are using is not updated.
Thus, go to the Settings menu of your web browser, and update it. Also, clear the cache, cookies, as well as browsing history. Doing so will prevent you from facing other technical issues in the future.
- Verify the Ethernet Connection
Did you not look at the condition of your Ethernet cable before using it to connect your Netgear router and the existing modem? Well, if you did, you wouldn’t be facing the 192.168.1.0 not working issue.
To troubleshoot the issue, it is recommended that you get the cable you are currently using replaced with a new one. Or, consider connecting your devices using a wireless source.
- Contact Your ISP
A weak internet connection can also be a contributing factor to the issue you are struggling with right now. Perhaps, you need to get in touch with your Internet Service Provider.
If you find out that the internet issue from his end, give him a couple of hours to get it fixed. Once done, try to access 192.168.1.254. Are you able to? No? In that case, keep reading.
- Disable Antivirus Software
Yes, we know that antivirus software protects devices from potential threats. But, what you don’t know is that they can also stop you from accessing certain websites. So, temporarily disable the antivirus software and VPN installed on your WiFi-enabled device.
- Reboot Your Netgear Router
Did none of the aforementioned tips help you get rid of the Netgear router IP not working issue? Well, that might be because of technical glitches then. To say goodbye to these glitches, you need to reboot your router.
Follow the steps mentioned below in order to give your device a proper restart:
- Disconnect your Netgear WiFi router from the existing modem.
- Power off your router and unplug it from the wall outlet.
- Wait for a couple of seconds.
- Then, plug your home router back into its wall socket.
- Press the Power button.
- Do not forget to reconnect your WiFi router to the existing modem.
Once your Netgear Nighthawk wireless router reboots, try to access the default IP address.
In the Nutshell
Coming across the Netgear router IP not working issue is quite common. However, fixing it isn’t. But, if you follow the troubleshooting tips mentioned in this post, you will surely be able to get rid of it.
Now, you can change the default password of your wireless device, update its firmware, hide its network name (SSID), or do pretty much anything that you want.
If you liked reading this post, do drop a word of appreciation in the comment section.