In order to experience well streaming, buffer-free movie watching, and playing online games, many people have turned to Netgear Nighthawk routers. However, at times, they come across various issues while using the device. And one such issue is the Nighthawk router keeps disconnecting.
Are you also a victim of the same issue with your Netgear router? Is the answer yes? Well, you have come to the right place. In this article, you will find every troubleshooting hack required to fix the issue at hand. Thus, quit waiting and get down to reading this instant.
[Fixed] Nighthawk Router Keeps Disconnecting Issue
- Restart the Netgear Router
You know what they say; “When a device refuses to work, try switching it off and on.” It looks like your Netgear Nighthawk router is demanding the same thing. Perhaps, that’s all what it needs in order to stop itself from disconnecting.
To restart your router, you need to unplug it from its existing wall outlet, hold on for a couple of seconds, and then, do the complete opposite of the first step.
After you are done restarting your router, try to perform Netgear router login and see if the Nighthawk router keeps disconnecting issue has left you for good or not.
- Check the Ethernet Connection
Sometimes, using a damaged Ethernet cable to connect the Netgear router to the existing modem can prove to be fatal. How? Well, think about it, if the cable is worn out or has cuts, will the connection even flow properly between your devices? No right?
Thus, it is recommended that you step out of your house as well as your comfort zone and get your hands on a new Ethernet cable.
- Change the Connection Source
In case you are still not able to access the Nighthawk router login portal, then it means that you are still stuck with the same issue. Perhaps, a wired connection is not in your luck. Therefore, you should opt for a wireless connection for your devices.
But, just ensure that the distance between your router and modem is not too much. Or else, you will also encounter other issues like Nighthawk router not working, routerlogin.net not working, Netgear router firmware update failed, etc.
- Keep WiFi Interference Away
Cordless phones, refrigerators, microwave ovens, cellular phones, washing machines, baby monitors, televisions, treadmills, and Bluetooth speakers are all examples of smart home appliances. Now, they may act smart but they can also interrupt the signals emitted from your Netgear Nighthawk router thereby forcing it to disconnect.
So, to take care of the problem, it is recommended that you take our advice and change the location of your router. Make sure that none of the aforementioned appliances are placed near it. Also, reflexive surfaces should be kept away from it.
- Perform Factory Default Reset
If none of the aforementioned fixes helped you troubleshoot the Nighthawk router keeps disconnecting issue, then you shouldn’t waste any more time resetting your device.
Restoring your device to its factory default settings is only possible if you take a walk through the below-given step-by-step instructions:
- Look for the Reset button located at the corner of your device.
- Once you find it, press it, but carefully.
- Hold on for some time.
As soon as the factory default reset process comes to an end, perform Netgear router setup by accessing the Nighthawk router login page.
Conclusion
The Netgear Nighthawk router keeps disconnecting issue can ruin the internet-usage experience of any user. Considering you are one of them, we hope that the hacks given above were helpful to you in troubleshooting the issue.
Did you like reading this post? Share your feedback in a YES or NO via the comment section.
