HomeTechnologyWhat is an Aggregation Router and How Does It Benefit Your Business?

What is an Aggregation Router and How Does It Benefit Your Business?

An aggregation router is a piece of networking hardware that combines data from two or more separate networks into one. If your company’s goal is to maximize productivity while decreasing expenses, this is an invaluable resource. With an aggregation router, businesses can combine their data from multiple sources into a single stream, allowing them to access and analyze data more efficiently. 

Additionally, an aggregation router can provide greater security, allowing businesses to restrict access to sensitive data while still allowing access to the data they need. Businesses can save time and money by using an aggregation router, while increasing their level of security as well. In this guide, we will discuss the benefits of using an aggregation router and how it can help your business succeed.

What is an aggregation router?

The exhaustion of IP addresses became a major issue in the 1990s that required a solution. Since each website requires its own individual IP address, this was inevitable. In the 1990s, the issue started to become a significant concern, but it wasn’t resolved until new methods were developed that utilized the technology that was available to increase the maximum number of IP addresses. One of these approaches was called “route aggregation,” and it is a method that involves a process that generates particular routes and controls how the network makes announcements of available routes.

An aggregation router is a type of router that attempts to organize a network by removing multiple routes and replacing them with a single, generic route. This method utilizes a hierarchical classification that assigns priority to addresses based on certain criteria that have been determined in advance. The number of different routes that service providers can take is constrained by the aggregation router. When a service provider obtains IP addresses, those IP addresses are then assigned in blocks that are consecutive to one another. After that, the service provider is able to partition the IP addresses into more manageable blocks of allocation and then lease those blocks out to competing Internet service providers.

If an aggregation router is implemented, the network may experience improved stability. When there are fewer routers in use, routing protocols have less overhead to deal with.  It reduces how often software needs to be changed when the network is upgraded or downgraded. The aggregation router relieves pressure on the system by reducing energy consumption, memory requirements, storage space, and network throughput.

Benefits of an aggregation router

Providing Redundancy While Also Scaling the Bandwidth

Creating a backup of a whole system, which is called redundancy, makes the system more resistant to failure. The range of frequencies, as well as any additional extensions, make up the bandwidth. Even if one of the physical connections in the LAG has been cut, users can still talk to each other by using an aggregation router, which also lets multiple connections provide more bandwidth than a single connection alone.

Increased Productivity through the Management of Traffic Distribution

The term “traffic” is used to describe the entirety of all data, both sent and received, that navigates a network at any given time. It is possible to lessen the burden placed on servers and avoid service interruptions caused by overload by distributing the traffic that is being processed. Even when there is heavy traffic on a website, it is still possible to have a smooth browsing experience.

Cost Reduction is Possible

It is possible to make use of the combined storage after multiple interfaces have been consolidated into one by means of an aggregation router. The cost of new equipment can be kept to a minimum thanks to the ability of the aggregation router to supply exactly the amount of memory and other resources that are required. However, excessive use of aggregation routers will necessitate the installation of new switches, which will not result in a cost reduction.

Automatic Failover and Failback Capabilities Are Both Available

The ability of an aggregation router to automatically failover and failback is one of the router’s many advantages. The term “failover” refers to a system that, in the event that an operational system fails for any reason, immediately transitions to a standby system. The term “failback” refers to the process of transferring data from a replacement system to the original system after it has successfully recovered from a major failure and been restored to its previous state. 

How to use an aggregation router

The use of aggregation routers can make it possible for a software-defined wide area network (SD-WAN) platform to combine multiple wide area network (WAN) connections by employing a variety of network transports and network services, such as encryption. After combining connections and services across WAN links, the SD-WAN platform can quickly send them to remote networks, like the cloud, to improve the customer experience.

The newest aggregation routers support multi cloud designs, which make it possible to deploy and manage scalable cloud applications that give users the best online experience.

How an aggregation router increases security

An aggregation router makes it easier to control the boundaries of a system and manage the traffic within it, which ultimately results in improvements to the system’s security, reliability, accessibility, and consistency. The aggregation router enhances both the security of the network and its overall performance by operating covertly behind an internal firewall. 

Different types of aggregation routers

LAN Aggregation Router

The many network connections that go from your router to a client device can be aggregated using a LAN aggregation router. LAN aggregation has several advantages, including increased throughput and bandwidth for all of the connected devices as well as network redundancy in the event that one of the connections fails. LAN aggregation could help you if you have a client device in your home that needs a lot of bandwidth or is essential to the way your home network works, like a switch that connects to a lot of other devices or a network-attached storage (NAS) system.

WAN aggregation router 

A wide area network (WAN) aggregation router can combine multiple internet connections from various providers into a single, unified network. With WAN Aggregation, a company’s performance can be improved by combining multiple network connections in parallel to make the most of underused links, spreading traffic evenly across those connections, and increasing the bandwidth available through each WAN port. The ports on the back of a WAN aggregation router are designed to accept at least two different internet signals, and each port has the capacity to deal with a certain amount of bandwidth.

In terms of WAN aggregation, switches, particularly those with LACP support, should be at the forefront of any company’s mind. In the OSI reference model, these devices are located at the data link layer and are responsible for connecting individual computers and servers into a single network. Businesses will be able to guarantee not only connectivity between devices but also a more efficient use of bandwidth throughout their facilities.

How to choose the right aggregation router for your business

Choosing an aggregation router solely on the basis of how aesthetically pleasing it is to you is insufficient criteria for making a decision. Your best decision will come after you’ve had time to consider all of your options. It is essential to keep in mind the factors listed below whenever you are shopping for a router to use in your company. Taking this step will assist you in locating the device that provides the highest degree of compatibility with the needs of your company. It’s important to take these factors into consideration when picking a router for your business, since they can help you find the one that’s right for you.


The first steps in choosing a router are becoming familiar with your immediate surroundings and determining your requirements with regard to coverage, capacity, and any number of other factors. 


Making sure your router purchase fits comfortably within your budget is crucial. As well as your specific needs, the router model you choose is crucial. Not only that, but you should check that you’re getting all the additional features you need to make the most of your internet service. Therefore, when you are thinking about how much you are willing to spend on a router, you should also think about the features that are essential for you to have.


In order to ensure that the router and the network are compatible, you will need to conduct some preliminary research first. You can search the internet for lists of compatible modems and routers that are supported by a variety of internet service providers, as well as instructions on what to look for and how to find them.


Manufacturers of routers are always releasing new models with improved features that can improve your time spent online. To get the most out of your money, choose a router that can be set up in different ways for LAN and WAN, has built-in security features, and is easy to manage.

Frequently asked questions about aggregation routers

Does the aggregation router make the connection faster?

In fact, aggregating signals does not increase the speed of the signals that enter the network, nor does it increase the overall network speed. But WAN aggregation can boost the signal’s throughput, giving users access to more stable bandwidth. As a consequence, the performance of endpoints might become faster or even more consistent.

To what extent can the required throughput be achieved?

The amount of throughput that a router is able to manage in a given amount of time is one factor that determines routing throughput. One more factor to take into account is the amount of time that must be spent searching the routing table. Choose a router that has high throughput redundancy if you intend to set up a complex network configuration or if you anticipate using a significant amount of data. 

What are the necessary steps for me to take in order to configure an aggregation router in my network? 

This will be determined by the type of Ethernet interface you use, as well as the connected devices and services that you make use of. To put it another way, it varies depending on the network device that you use.


Most Popular