A gas water heater is a very important piece of equipment that you should install in your home especially if you are living in a very cold area. If it gets extremely cold where you live then you can’t survive without having a water heater in your home because you will not be able to take a hot shower and it is going to be very brutal for you during the winter season.
There are many times when the water heater stops working and then you have to call the plumber. But first of all, you need to understand why the water heater is not working in your home and then you will be able to understand the situation much better. This will also give you an idea about the type of worker that you need to call to fix the situation that is happening in your home during the winter season.
In this article, we will discuss 6 common reasons your gas water heater may not be working. So keep on reading to find out more information below about why your gas hot water cylinder is not working during the winter season and how you can resolve that.
1. Problem With The Temperature Of The Water
Table of Contents
If the water heater in your home is not working then the reason might be that the temperature is too low or too high. You will have to adjust the thermostat if you want to get rid of this problem. You need to remove the build-up in the gas water heater as there can be a lot of mineral build-up or other things stuck in there. If the water heater is blocked then it will not give you hot water and you need to unblock it first.
2. Dirty Water
If you are getting dirty water out of the water heater in your home then it is a major problem and you need to get rid of that. You will have to call a professional to resolve this issue. The discoloration and red water can also be due to rust and magnesium in the water.
3. Bad Smell
If the bad smell is coming from the water, then it means there is something wrong with the sewage system and bacteria is growing inside it. You will have to flush the water tank completely so that you can get rid of this problem.
4. Leakage
If the hot water system is leaking then it means that the water heater in your home will stop working properly. It is a very difficult problem to fix. What you have to do is to tight the valves and then replace them to get rid of this problem completely.
5. Pilot Light
The next reason why your water heater might not be working is that there might be a problem with the pilot light of the water heater. If it is not working properly then you will have to get rid of the defective gas valve to get rid of this problem.
6. Bad Valve
If there is any problem with the gas water heater valve when you are home then you have to replace it so that it can start working once again.
